- VW T6 Front OPS Parking Sensors Upgrade £745+ Vat
VW Optical Front Parking Sensors Upgrade for Volkswagen Transporter T6
VW T6 Front Optical Parking Sensors Upgrade. If your T6 does have genuine rear factory fitted parking sensors, it is possible to add front optical sensors to upgrade to Full OPS Front and Rear parking sensors.
Optical Parking Sensors provide a visual display of the Vehicle on the radio or navigation system screen, showing the vehicles position and distance from obstacles. The location of any obstacle within range of the ultrasonic sensors is highlighted on screen. The Optical Rear parking sensors system will mute your Radio helping you to focus on parking more.
If Your Volkswagen Transporter T6 does have Aftermarket Multimedia or Navigation Fitted, we may need to fit a suitable CAN Interface that will work correctly with your radio, steering wheel and provide an optical display for parking sensors (costs may very for this). In many cases the car audio fitter will choose to fit a cheaper Interface... and unfortunately the only way to get the OPS on the Multimedia is by replacing this basic CAN interface...
Front and Rear OPS parking sensors activate automatically with reverse gear engaged or via the PDC Button. The buzzer will beep once, the system will stay active as long as reverse gear is engaged. Logically the closer you are to an obstacle, the faster the beep, when you then get to around one foot away from said obstacle the beep becomes constant.
If there is no obstacle detected the Front and Rear OPS system switch off automatically after several seconds from deselecting reverse gear or when you travel forwards faster than approximately 6mph.
You can mute the acoustic signals of the VW optical parking system by pressing the MUTE function button on the radio screen or navigation system. The muting will be cancelled if the OPS is Switched off and back on again.
Front and Rear OPS Parking sensors will also work in conjunction with Rear view OEM VW Camera, If you have both fitted, selecting reverse gear would turn the camera and OPS On. An overlayed display of the optical sensors will be displayed on the left hand side of the screen. This may work differently with aftermarket Navigation, however in general most of the later Multimedia/ Navigation System will either display both or give you ability to switch between them.
To arrange an installation please click on the contact us button and follow the instructions
You are welcome to stay in our waiting area, where we have free Wi-Fi connectivity, Smart TV , range of magazines, workshop viewing area and hot drinks.
Installation takes approximately 2-3h